How to Repair a Damaged Hard Drive

      Damaged hard drive ..? this is not very pleasant, makes all the work and other important things stored in it  becomes a big problem for us. Well this is what we've probably feel if your hard disk in your PC is damaged. lost a lot of data is the main risk is felt most uncomfortable, not to mention the risk of hardware damage the hard disk itself, this being the worst thing we can feel. The following article can help you to repair the damaged hard drive.  

     4 levels of damage and how to fix the hard drive we discuss here, because it damages the hard drive is distinguished by several levels of difficulty to fix it. technically hard drive can be fixed depending on the level of damage. .

     Level 1
    
      Damage that occurred at level usually caused Bad sector. There are several ways to handle and experiment variation, adapted to drive the brand and the number of bad sectors. For early handlers can use the command FORMAT C :/ C (adjust the drive you want to format). / C which is used to clean the damaged cluster..
     The second step if you have not managed to use the Disk Manager program from each of the hard drive manufacturer. If not successful you can also use the software HDDREG, please download the program on the internet. If not managed to try the Low Level Format or File Zero.
      If you still can, you can do the cutting sector damaged disk which, by dividing it and not use a damaged sector.
    
    Level 2
    
    Damage that occurs at level 2 is Lost Hard Drive Partition and Data. This could be caused by a virus or a mistake to use utility program. Some need to be considered in restoring the lost hard disk partition, the disk capacity and file system type. FAT File System partition with more easily restored than NTFS or Linux File System.
    First check the hard drive partitions using FDISK or Disk Manager to restore it to use software such as Acronis Disk Director, Handy Recovery, Stellar Phoniex etc..

    Level 3

    Erosive damage to the hard drive detected in BIOS but can not be used, always appears an error message when the computer do the POST. Usually this is caused by firmware of the hard drive which is problematic. For many of these symptoms occur in a series of Maxtor hard drive brand names of Gods. To fix it you can download the Firmware program from the hard drive brand website.

    Level 4
 
   Correct the damage that causes the hard drive is not detected by the BIOS and can not be used again. This is the hardest level in my opinion. Due to the improvement we need a little permutations inside electronic devices and components. Menganggulangi hard drive is not detected by the BIOS many ways.

•         Check the electrical current flowing to the hard drive

•         Replacing the hard drive IC on mainboard

•         Open Cover Cover your hard disk and check the position of Head hard drive

•         Could the which manner Extreme damage the hard drive the which cannibalized by the other hard drive damage the which is different, can be a way to replace maiboardnya or take his IC